3/1/2023 0 Comments Pebble url with home remoter![]() I also suggest labelling the main connecting wires before detaching from the circuit board.Īfter removing the main circuit board, solder the four connecting wires in the locations shown. ![]() You should switch the air conditioner off at the mains before proceeding. The circuit board can then be carefully lifted out after removing all the anchoring screws. The casing is easily removed by levering with a small flat end screwdriver in the casing slots at the top of the casing. The aim was to trigger the button with a relay and measure the voltage across the led to detect on/off status without affecting the basic operation of the controller. The picture below shows the on/off switch and the status led. Hacking the protocol was going to be complex given its closed nature and 2 way signalling methods, so hacking the controller itself was the best option. but these features are well managed by the controller and are not really required for typical remote operations. There are plenty of other potential options to control such as switch between heat/cool, zones, etc. I could then add whatever software rules I liked running from another network location to control the air conditioner.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |